Specifications

Application Views Stratacom ATM Application
Device Management Page 82 Cisco Stratacom BPX8600 and IGX8400
QIR
The transmit Quiescent Information Rate (QIR)
parameter (in cells per second) for this endpoint.
% Utilization
The value of this object is equal to the channel
percentage utilization setting for this endpoint.
This is the expected long-term utilization of the
channel by this endpoint.
CBS
The value of this object is equal to the Compliant
Burst Size (CBS) in cells for this endpoint. This
object corresponds to the Maximum Burst Size
(MBS) defined by ATM standard documents.
IBS
The value of this object is equal to the Initial
Burst Size in cells for this endpoint.
CCDV
The value of this object is equal to the Compliant
Cell Delay Variation for this endpoint. It
corresponds to the CDVT (0+1) parameter defined
by the ATM standard documents.
CLP High
The value of this object is equal to the CLP (Cell
Loss Priority) tagging activation threshold for this
endpoint.
CLP Low
The value of this object is equal to the CLP (Cell
Loss Priority) tagging deactivation threshold for
this endpoint.
CLP Tagging
The value of this object enables the CLP (Cell Loss
Priority) tagging for handling non-compliant cells.
When enabled the CLP bit is set on non-compliant
cells. When disabled non-compliant cells are
discarded.
ForeSight
The value of this object determines whether or not
the ForeSight option is being used. If set to false,
then ForeSight is not used, and if true then
ForeSight will be used.
ForeS Rate Up
The value of this object is equal to the ForeSight
Rate Up value in cells per second per adjust for
this endpoint.
ForeS Rate Down
The value of this object is equal to the ForeSight
Rate Down value expressed as percentage of MCR
(Minimum Cell Rate).
QIR To
The value of this object is equal to the QIR
timeout value. This object corresponds to the
Initial Cell Rate (ICR) timeout.