Specifications

Application Views Stratacom Frame Relay Application
Device Management Page 75 Cisco Stratacom BPX8600 and IGX8400
parameters not provided are derived from this
object.
CIR
The value of this object is equal to the Committed
Information Rate (CIR) parameter (in 100s of bits
per second) for this endpoint. This value will be
defaulted to the provided MIR during an endpoint
create. 0-CIR feature allows this object to be 0.
Committed Burst
The value of this object is equal to the committed
burst size (Bc) parameter (in bytes) for this
endpoint. This parameter is entered instead of the
Frame Relay Endpoint VcQSize parameter. If both
the Bc and VcQSize are provided, the values are
tested for compatibility.
Excess Burst
The value of this object is equal to the excess
burst size (Be) parameter (in bytes) for this
endpoint. This parameter is entered instead of the
Frame Relay Endpoint PIR parameter. If both the
Be and the PIR are provided, the values are tested
for compatibility.
Queue Depth
The value of this object is the maximum queue
depth (in bytes) for this endpoint. This parameter
is entered instead of the Frame Relay Endpoint
Committed Burst Size (Bc) parameter. If both the
VcQSize and the Bc are provided, the values are
tested for compatibility.
PIR
The Peak Transmit Bandwidth (PIR) parameter (in
100s of bits per second) for this endpoint. This
parameter is entered instead of the Frame Relay
Endpoint Excess Burst Size (Be) parameter. This
value defaults to the current port speed of the
associated interface.
Max Credits
The maximum credits that can be accrued for this
endpoint.
Congest Notif
The threshold setting used by the explicit
congestion notification feature for this endpoint’s
transmit queue. This value is specified in bytes.
When the Frame Relay Endpoint VcQSize value
exceeds this value, then the FECN (Forward
Explicit Congestion Notification) bit will be set in
all frames transmitted to the remote endpoint.
QIR
The transmit Quiescent Information Rate (QIR)
parameter (in 100s of bits per second) for this
endpoint. This value can range between the MIR
and PIR values and must be between 2400 and
204800. This parameter has meaning only if the