Specifications

Application Views StrataCom Application
Device Management Page 66 Cisco Stratacom BPX8600 and IGX8400
applicable (-1) to BPX ATM trunk (BNI or BXM.)
The default value for this field is “75.”
BDataB Tx CLP Low
The transmission low CLP threshold (in
percentage) for Bursty Data B of this trunk. This
field is not applicable (-1) to IPX or IGX ATM
trunks. The default value for this field is “25.”
BDataB Rx CLP Low
The receiving low CLP threshold (in percentage)
for Bursty Data B of this trunk. This field is not
applicable (-1) to BPX ATM trunk (BNI or BXM.)
The default value for this object is “25.”
Max Port on Channel
The maximum number of channels a BXM trunk
port can support. This field is applicable to BXM
trunk only. The default value for this field is
“1484.”
Link Type
The physical link type of the trunk. The default
value for this field is “terrestrial (1).”
Deroute Delay Timer
The deroute delay timer of the trunk in unit of
second. The default value for this object is “0.”
Trunk Information - Frame Relay
Trunk Stat
The Frame Relay Trunk Packet Statistics Table
shows transmit packet statistics.
To access this table, select Trunk Information
-> Frame Relay Trunk Stat from the Icon
Subviews menu for the StComCommonApp. This
table will display the following information:
Switch IF
An interface entry on the Frame Relay Trunk
Statistics table.
CRC
The number of Fast Packet CRC errors.
Out of Frame
The number of Fast Packet Out of Frame errors.
Tx Voice Drop
The number of transmitted voice fast packets
dropped.
Tx Time-Stamp Drop
The number of transmitted time-stamped packets
dropped.
Tx Non T-S Drop
The number of transmitted non time-stamped
packets dropped.