Specifications

Application Views StrataCom Application
Device Management Page 65 Cisco Stratacom BPX8600 and IGX8400
SVC Queue Map
A 32-bit octet string which represents the queue
bin allocation. If the bit is set to “1,” it is allocated
to SVCs and if “0” it is allocated to PVCs.
SVC Egress Queue
The egress queue pool size.
SVC BW
The bandwidth partition available for SVCs.
SVC In Use
This field is set by the INS to indicate that SVC
partitioning information is being used by INS. The
initial value is “notInUse.” This field is valid if
ATM Port Service Channels is non-zero.
Tx Rate
The trunk transmission rate in unit of cells per
second.
Pass Synchroniz
The selection of this trunk to pass
synchronization to the network clock. The default
value for this object is “yes “ (1.)
Stat Reserve
The Statistical Reserve in cells per second for this
trunk.
Loop Clock
This field indicates if this trunk has been
configured to loop receive clock back to transmit.
The default value for this field is “no” (2.)
BDataB Tx Queue
The depth of Bursty Data B transmission queue
(in decimal.) The default value for this field is
“8000.”
BDataB Rx Queue
The depth of Bursty Data B receiving queue (in
decimal.) The default value for this field is “8000.”
BDataB Tx EFCN
The transmision EFCN threshold (in decimal) for
Bursty Data B of this trunk. The default value for
this field is “8000.”
BDataB Rx EFCN
The receiving EFCN threshold (in decimal) for
Bursty Data B of this trunk. The default value for
this field is “8000.”
BDataB Tx CLP High
The transmission high CLP threshold (in
percentage) for Bursty Data B of this trunk. The
default value for this field is “75.”
BDataB Rx CLP High
The receiving high CLP threshold (in percentage)
for Bursty Data B of this trunk. This field is not