Specifications

Application Views StrataCom Application
Device Management Page 64 Cisco Stratacom BPX8600 and IGX8400
End Type
The type of node or shelf at the other end of this
trunk.
End Name
The name of the shelf at the other end of this
trunk.
End IP Addr
The IP address of the shelf at the other end of this
trunk.
End IF
The switch interface index at the other end of this
trunk.
End Domain
The domain of the shelf at the other end of this
trunk.
LCN Rx for SVC
The number of LCNs (Logical Channel Number)
reserved for the SVCs (Switched Virtual Circuit)
on this trunk. The other SVC parameters are valid
if this field has a non-zero value.
Share LCN
Whether the LCNs (Logical Channel Number) are
shared per port basis or per card basis.
ATM Trunk Table 2
Switch IF
An interface entry for the ATM Trunk table.
SVC LCN Low
The lower limit of the LCN (Logical Channel
Number) value which can be used on this trunk.
SVC LCN High
The upper limit of the LCN (Logical Channel
Number) value which can be used on this trunk
for SVCs (Switched Virtual Circuits.)
SVC VPI Low
The SVC VPI lower limit. The partitioning is based
on the STI Header VC-format. The 16-bit
concatenated VPI/VCI field is partitioned between
PVC and SVC. On a physical trunk a range will be
reserved for SVCs.
SVC VPI High
The SVC VPI upper limit. The partitioning is
based on the STI Header VC-format. The 16-bit
concatenated VPI/VCI field is partitioned between
PVC and SVC. On a physical trunk a range will be
reserved for SVCs.
SVC VCI Low
The SVC VCI lower limit.
SVC VCI High
The SVC VCI upper limit.