Specifications

Application Views StrataCom Application
Device Management Page 62 Cisco Stratacom BPX8600 and IGX8400
Pass Sync
The selection of this trunk to pass
synchronization to the network clock. The default
value of this field is “no” (2.)
Stat Reserve
The statistical reserve in packets per second for
this trunk. The default value for this field is “600
cps.”
Loop Clock
This field indicates if this trunk has been
configured to loop receive clock back to transmit.
The default value for this field is “no” (2.)
B Data B Queue
The depth of Bursty Data B transmission queue
(in decimal) of this trunk.
B Data B EFCN
The transmission EFCN threshold (in decimal) for
Bursty Data B traffic of this trunk.
B Data B Hi CLP
The transmission high CLP threshold (in
percentage) for Bursty Data B traffic of this trunk.
The default value for this field is “75%.”
B Data B Low CLP
The transmission low CLP threshold (in
percentage) for Bursty Data B of this trunk. The
default value for this field is “25%.”
Link Type
The physical link type of the trunk. The default
value for this object is “terrestrial (1.)”
Trunk Information - ATM Trunk
The ATM Trunk Tables show ATM Trunk packet
information, other end of the trunk information,
Switched Virtual Ciruit information, and Bursty
Data B information.
To access these tables, select Trunk Information
-> ATM Trunk from the Icon Subviews menu for
the StComCommonApp. These tables, ATM
Trunk Table 1 and ATM Trunk Table 2, will
display the following information:
ATM Trunk Table 1
Switch IF
An interface entry for the ATM Trunk table.
Alarm State
The alarms state for the logical interface table
row.
Alarm Enable
A field to disable/enable a trunk alarm.
Communic Status
The communication status of the protocol on this
trunk.