Specifications

Application Views StrataCom Application
Device Management Page 57 Cisco Stratacom BPX8600 and IGX8400
Description
Description for this voice channel. Contains
information about the domain, nodename, slot,
and channel for the connection.
Other EndPt Desc
Description for the remote channel. Contains
information about the domain, nodename, slot,
and channel for the connection.
Admin Status
The user requested state for voice endpoint table
row. A user can create/delete/modify this voice
channel connection by setting this object
appropriately. To test a particular object, set the
value to “test.”
Oper Status
The actual state of the voice channel. If the state
failed, check No Route Found Failure, Bump
Failure, and Test Failure to determine reason for
failure.
Rate Type
The type of voice connection. Table 14 lists the
types and their descriptions.
End Point Fail
Endpoint failed because of a remote endpoint
failure. The remote endpoint is on a node that
resides in another domain making the connection
an inter-domain connection.
No Route Found
Channel connection failed because no route to the
remote channel could be found.
Table 14: Voice Connection Types
Type Description
a32 Uses ADPCM only. Can select 32/24/16 Kbps
compression.
a16z Standard 16kbps ADPCM only. Compressed code
can have strings of zeros and should be used on
lines that have other zero code suppression.
c32 Uses both ADPCM and Voice Activity Detection
(VAD).
c24 Can select 32/24/16 Kbps ADPCM compression.
c16z Standard 16Kbps ADPCM and Voice Activity
Detection (VAD).
p 64 Kbps connection. No compression.
t Transparent. Clean 64Kbps connection. No
compression.