Specifications

Application Views StrataCom Application
Device Management Page 56 Cisco Stratacom BPX8600 and IGX8400
is to be SET to disable, values for the related
parameters are not allowed in the SET.
Echo Convergence
Determines whether the Echo Convergence is
enabled. The default value is Enable (1.) If the
Echo Cancel is to be SET to disable, values for the
related parameters are not allowed in the SET.
NonLinear
Determines whether the NonLinear processing is
enabled. The default value is Enable (1.) If the
Echo Cancel is to be SET to disable, values for the
related parameters are not allowed in the SET.
In Gain
The amount of gain inserted at the receiver side of
a CDP/CIP circuit line on voice connections. The
gain is specified in decibels to be assigned to the
channel. The gain can be configured between +6
dB and -8 dB. By default it is zero.
Out Gain
The amount of gain inserted at the transmit side
of a CDP/CIP circuit line on voice connections.
The gain is specified in decibels to be assigned to
the channel. The gain can be configured between
+6 dB and -8 dB. By default it is zero.
% Utilization
The percentage of utilization of this channel. This
object informs the system software of the
expected utilization rate of connections with
traffic dependent compression algorithm. For use
in voice connections with VAD. Acceptable values
are in the range of 0 to 100. The default value for
voice is 40.
Voice Information - Voice
Endpoint
The Voice Endpoint Table contains configuration
information about each voice channel. This table
is used to model a specific Voice Channel
connection. This table contains parameters which
are required to create a voice connection and
configure the channel.
To access this table, select Voice Information ->
Voice Endpoint from the Icon Subviews menu
for the StComCommonApp. This table will
display the following information:
Index
The index to the Voice Endpoint table.
Remote Node Index
The index for the remote node for this channel
endpoint. For local (intra-node) connections, this
index is associated with the local node and will be
in the range of 1024 to 2047.