Specifications

Application Views StrataCom Application
Device Management Page 55 Cisco Stratacom BPX8600 and IGX8400
Interface Type is a pre-defined type, the value is
not provided for this field.
Condition
The name of one of the condition criterion
templates defined in the Voice Conditioning Table.
The value corresponding to pre-defined interface
Types have been given in the table in the
“Description” clause of the object Voice Channel
Interface Type Name. Currently, only the pre-
defined conditioning templates are supported. If
the interface type is pre-defined type, value is not
provided for this field.
Canceller
The integrated echo canceller channel parameters
associated with the specified voice channel. By
default it is disabled. If it has to be enabled from a
disabled state then the values for the variables in
Table 13 have to be supplied.
If any one of the variables is not specified, the
previous value of that variable shall be retained. If
the Echo Cancel is to be SET to disable, values for
the related parameters are not allowed in the SET.
Echo Return Loss
The Echo Return Loss if the echo canceller is
enabled. The default value is High (2). If the Echo
Cancel is to be SET to disable, values for the
related parameters are not allowed in the SET.
Tone Disabler
Determines whether the Tone Disabler is enabled.
The default value is Enable (1.) If the Echo Cancel
Table 13: Voice Channel Echo Canceller
Values
Name Value Description
voiceChannelEchoRtnLoss High/
Low
Set the echo return
loss to High/Low
voiceChannelEchotone Enable/
Disable
Enables or disables
the tone disabler.
voiceChannelEchoConv Enable/
Disable
Enables or disables
convergence
voiceChannelEchoNlp Enable/
Disable
Enables or disables
non-linear
Processing