Specifications

Application Views StrataCom Application
Device Management Page 50 Cisco Stratacom BPX8600 and IGX8400
Switch Media - Sonet Interfaces
The Sonet Interfaces table shows a list of the
Sonet interfaces.
To access this table, select Switch Media ->
Sonet Interfaces from the Icon Subviews menu
for the StComCommonApp. This table will
display the following information:
Switch IF
The interface entry for the Sonet Interfaces table.
Alarm State
The alarms state for the logical interface table
row.
Alarm Type
The alarm status information for the alarm state
of a trunk or line.
IF Type
The type of interface used to provide information
about the sonet type: T3, E3.
Frame
The line framing standard for the logical interface
table row.
Speed
The line speed for the logical interface table row in
units of megabits per second.
Clock Source
The clock source for the logical interface table
row.
Local Loopback
The line local loopback. The settings are as
follows:
• Get - show the current local loopback status
• Set - enable or disable the local loopback.
Lcl Rmt Lpbk
The line local remote loopback. The settings are
as follows:
• Get - show the current local remote loopback
status.
• Set - enable or disable the local remote
loopback.
Note:
Note:
The Sonet Local Loopback and the
Remote Loopback cannot be enabled
at the same time.