Specifications

Application Views StrataCom Application
Device Management Page 49 Cisco Stratacom BPX8600 and IGX8400
Alarm State
The alarms state for the logical interface table
row.
Alarm Type
The alarm status information for the alarm state
of a trunk or line.
IF Type
The type of interface used to provide information
about the DS3 type: T3, E3.
Line Code
The type of ZCS coding used on this DS3 line.
Clock Source
The clock source for the logical interface table
row.
Local Loopback
The line local loopback. The settings are as
follows:
• Get - show the current local loopback status
• Set - enable or disable the local loopback.
Line Lcl Rmt Lpb
The line local remote loopback. The settings are
as follows:
• Get - show the current local remote loopback
status.
• Set - enable or disable the remote loopback.
Note:
Note:
The DS3 Line Local Loopback and the
Remote Loopback can not be enabled
at the same time.