Specifications

Application Views StrataCom Application
Device Management Page 45 Cisco Stratacom BPX8600 and IGX8400
Admin Status
User requested state for this port queue table
row. The only operation supported in this table is
modify.
Type
The type of the queue. If the type is “axis”, then
the Index specifies the axis slot associated with
this queue.
Depth
The storage depth allocated to this queue in block
of cells. The block size is one cell for T3/E3 and
64 cells for OC3. The aggregate of the queue
depths for all queues cannot exceed the
maximum storage available for the port.
CLP High
The CLP tagging activation threshold for this
queue expressed as a percentage of queue depth.
CLP Low
The CLP tagging deactivation threshold for this
queue expressed as a percentage of queue depth.
EFCI Thesh
The EFCI threshold for this queue expressed as a
percentage of queue depth.
Algorithm
The queue service algorithm. (Table 10) describes
the settings for this field.
Port Information - ATM Port
Statistics
The Port Information - Atm Port Statistics Table is
composed of three tables that show ATM port
statistical information.
To access these tables, select Port Information
-> ATM Port Statistics from the Icon Subviews
menu for the StComCommonApp. The three
tables, Received Statistics Table, Transmitted
Statistics Table, and Error Statistics Table, will
display the following information:
Table 10: Queue Service Algorithm Settings
Setting Description
Off (1) Never Serve
Always (2) Always Serve
Ok (3) Ok to Serve, Not Minimum Guaranteed
Min_Guar (4) Minimum Guaranteed bw, No Limit
Min_Smooth (5) Minimum Guaranteed bw, Smoothed
Min_Delay (6) Minimum Guaranteed bw, Delay Limited