Specifications

Application Views StrataCom Application
Device Management Page 44 Cisco Stratacom BPX8600 and IGX8400
LMI Stat Enq Retry
The maximum number of times a Status Enquiry
message is retransmitted.
LMI Upd Stat Retry
The maximum number of times an Update Status
message is retransmitted.
LMI Poll
A polling timer that, if enabled, a Status Enquiry
message is sent when this timer expires.
SVC LCN Low
The lower limit of the LCN value which can be
used on this port for SVCs (Switched Virtual
Circuits.) This field is valid if Svc Channels is
non-zero.
SVC LCN High
The upper limit of the LCN value which can be
used on this port. This field is valid if Svc
Channels is non-zero.
SVC VPI Low
The lower limit of the VPI value which can be used
on this port. The VCIs (Virtual Channel
Identifiers) that can be used are from 32 to the
largest VCI value allowed on that port. The default
value is “100.” This field is valid if Svc Channels is
non-zero.
SVC VPI High
The upper limit of the VPI value which can be
used on this port. The VCIs (Virtual Channel
Identifiers) that can be used are from 32 to the
largest VCI value allowed on that port. The default
value is “100.” This field is valid if Svc Channels is
non-zero.
SVC VCI Low
This field stores the SVC VCI lower limit.
SVC VCI High
This field stores the SVC VCI upper limit.
Port Information - Atm Port Queue
The Port Information - Atm Port Egress Queue
Table describes the fields that you have access to
read and to configure the ATM Port Egress
Queues.
To access this table, select Port Information ->
ATM Port Queue from the Icon Subviews menu
for the StComCommonApp. This table displays
the following information:
Index
Index into the port egress queue array of the given
port that uniquely identifies this queue. If the
value of Type is “axis,” then the value of this field
also specifies the axis slot associated with this
queue.