Specifications

Application Views StrataCom Application
Device Management Page 37 Cisco Stratacom BPX8600 and IGX8400
Threshold Table
Slot
The slot number for the port.
Port
The port number for the port.
Port DLCI
Port DLCI for Frame Forwarding (FRI subrate
interface only) - Get Operation. If the network
manager attempts to GET this object from a
T1/E1 port, SNMP_OBJ_NA (Object Not
Applicable -1) is returned.
Max Tx Bytes
The maximum bytes queued for transmission
from the FRP port.
ECNQ
The port Explicit Congestion Notification
threshold. This is the point at which the BECN
(Backward Explicit Congestion Notification) and
FECN (Forward Explicit Congestion Notification)
bits will be set in the communications to the user
device.
DE %
The percentage of the queue depth above which
frames with the Discard Eligibility bit set will be
discarded. An entry of 100% effectively disables
DE for the port.
Verification Timer
The link integrity verification timer heartbeat
(keep-alive) period. It should be set to 5 seconds
more than the heartbeat time in the user device.
Default is 15 seconds.
Error
The number of failures in the monitored events
that cause the keep-alive process to report an
alarm.
Monitored Events
The number of monitored events for the keep-
alive process. A port communication fail condition
is cleared after this number of successful polling
cycles.
Up RNR
The Upper Receiver-Not-Ready (RNR) threshold.
This threshold specifies the number of RNR
indications from the user equipment before an
alarm is cleared for this connection. The default is
75.
Low RNR
The Lower Receiver-Not-Ready (RNR) threshold.
This threshold specifies the number of RNR
indications from the user equipment before an
alarm is cleared for this connection. The default is
75.