Specifications

Application Views StrataCom Application
Device Management Page 36 Cisco Stratacom BPX8600 and IGX8400
Poll Cycle
Full Status Polling Cycle (applicable to NNI FR
port only), indicating the interval (in terms of
polling cycles) at which a Full Status Report of all
PVCs is requested. This interval should be
between 1 and 255 polling cycles with a default of
6. If the network manager attempts to GET this
field from a port with a protocol other than NNIs,
SNMP_OBJ_NA (-1) is returned. If the network
manager attempts to SET this field for a port with
a protocol other than NNIs (Network-to-Network
Interfaces), an error is reported.
EFCI to BECN
This field indicates whether EFCI (Explicit
Forward Congestion Indication) to BECN
(Backward Explicit Congestion Notification)
mapping is enabled.
RTS
The current status of the RTS (Request To Send)
lead (subrated FRI only). “NA” is used for T1/E1
FRI. This field is valid only if the port is subrated
and is DTE (Data Terminal Equipment).
Otherwise, “NA” is returned.
DTR
The current status of the DTR (Data Terminal
Ready) lead (subrated FRI only). “NA” is used for
T1/E1 FRI. This field is valid only if the port is
subrated and is DTE (Data Terminal Equipment).
Otherwise, “NA” is returned.
DCD
The current status of the DCD lead (subrated FRI
only). “NA” is used for T1/E1 FRI. This field is
valid only if the port is subrated and DCE (Data
Communications Equipment.) Otherwise, “NA” is
returned.
CTS
The current status of the CTS (Clear To Send)
lead (subrated FRI only). “NA” is used for T1/E1
FRI. This field is valid only if the port is subrated
and DCE (Data Communications Equipment.)
Otherwise, “NA” is returned.
DSR
The current status of the DSR (Data Set Ready)
lead (subrated FRI only). “NA” is used for T1/E1
FRI. This field is valid only if the port is subrated
and is DCE (Data Communications Equipment.)
Otherwise, “NA” is returned.
Loopback
The loopback mode.
Ext Conn
The flag indicating if the connection with the
external device is lost.