Specifications

Application Views StrataCom Application
Device Management Page 34 Cisco Stratacom BPX8600 and IGX8400
Status Table
Slot
The slot number for the port.
Port
The port number for the port.
Port DLCI
Port DLCI for Frame Forwarding (FRI subrate
interface only) - Get Operation. If the network
manager attempts to GET this object from a
T1/E1 port, SNMP_OBJ_NA (Object Not
Applicable -1) is returned.
Admin
The requested state for logical port table row.
Values are: Up, Down, Configure, Add, and Delete
a Frame Relay Logical port.
Oper
The actual state of the logical port.
Port Speed
The baud rate of the port.
Clock Type
The type of port clock.
Port Type
The type of FRP subrated port.
VC Count
The number of virtual connections that terminate
on this port.
First VC
The object identifier (OID) denoting the first
endpoint associated with this port. The
management station can retrieve all the
information about the first connection by reading
from the row pointed to by this OID.
Aggregate Channels
The number of aggregate channels assigned to
this logical port (FRI T1/E1 interface only) when
the port is added. For subrate ports, this field is
always “1.”
Channel Speed
The channel speed (FRI T1/E1 interface only). For
FRI subrate interface this field should be set as
“NA.”
IDE Map
The flag indicating whether IDE to DE mapping
should be performed.
LMI Mode
A numeric value that specifies the current LMI
(Local Management Interface) operation mode.
The values are shown in Table 9.