Specifications

Application Views StrataCom Application
Device Management Page 33 Cisco Stratacom BPX8600 and IGX8400
for a given SNMP manager. Currently a limit of
ten (10) entries are imposed on this table. Each
manager is allowed to access its own table.
Individual manager access is determined by IP
address.
To access this view, select Strm Error Status
from the Icon Subviews menu for the
StComCommonApp. This view will display the
following information:
Last Index in Strm Error Status
If at least one entry exists in the error status table
for the given manager, the value of this object
contains the index corresponding to the last
entry. If no entry exists in the error status table
for the given manager the value of this object is
-1.
Request Id
This field contains the PDU (Protocol Data Unit)
request ID associated with the error.
Error Status Code
This field contains an error status code used by
the manager to take automated corrective actions
when requests encounter failures. If no error is
encountered, a successful status is provided.
Status Description
This field contains error status information for
failed SETS to one or more objects within a table.
This field is updated only on failed SETS. Since
the SNMP standard allows only limited number of
error status returns, the managers can retrieve
this variable to get additional information on a
failed SET. Typically, this field will contain
information specifying date, type of operation
(SET or GET), MIB table associated with the error,
and detailed text regarding the failure.
Port Information - FR Logical Port
Config
The Frame Relay Logical Port Configuration
Tables provide detailed views of the logical ports
available on the switch and provide the following
areas of information on a per port basis:
• Port identification
• Current admin and operation status
• Port-specific configuration
• LMI-related configuration
• Port error status
• Pointer (s) to other table
To access this table, select Port Information ->
FR Logical Port Config from the Icon Subviews
menu for the StComCommonApp. This table is
divided into two tables, Status Table and
Threshold Table, which display the following
information: