Specifications

Application Views StrataCom Application
Device Management Page 32 Cisco Stratacom BPX8600 and IGX8400
Located at the bottom of the Trap Registration
Table, clicking on this button opens the Trap
Registration Entry Creation view where you can
make changes to the following table entries:
• IP Address
• Admin Status
• Src Ip Address
• Udp Port
Error Status
The Error Status Table is used to maintain status
information about SNMP SET requests from a
manager. When an SNMP SET completes, an
entry is created. In addition to successful status,
the manager is provided information associated
with any failed requests. This table is indexed by
request ID. The request ID is the SNMP PDU
identifier associated with the failed request.
To access this view, select Error Status from the
Icon Subviews menu for the
StComCommonApp. This view will display the
following information:
Last Index in Error Status
If at least one entry exists in the error status table
for the given manager, the value of this object
contains the index corresponding to the last
entry. If no entry exists in the error status table
for the given manager the value of this object is
-1.
Request Id
This field contains the PDU (Protocol Data Unit)
request ID associated with the error.
Error Status Code
This field contains an error status code used by
the manager to take automated corrective actions
when requests encounter failures. If no error is
encountered, a successful status is provided.
Status Description
This field contains error status information for
failed SETS to one or more objects in Frame Relay
Endpoint Table and/or vc Table. This field is
updated only on failed SETS. Since the SNMP
standard allows only limited number of error
status returns, the managers can retrieve this
variable to get additional information on a failed
SET. Typically, this field will contain information
specifying date, type of operation (SET or GET),
current SNMP table and additional error
information.
Strm Error Status
The Strm Error Status Table is used to maintain
status information about SNMP SET requests
from a manager. It contains a list of error statuses