Specifications

Application Views StrataCom Application
Device Management Page 31 Cisco Stratacom BPX8600 and IGX8400
Group Description
The description for the group identifier. This
describes the connection group name.
Located at the bottom of the Connection Table,
click on this button to open the Connection Entry
Creation view where you can make changes to the
following table entries:
• Next ID
• Local VC Endpt Desc
• Remote VC Endpt Desc
• Class of Service
• Admin Status
• Preferred Route Description
• Group Desc
Trap Registration
The Trap Registration is the switch platform
registration table that provides access to trap
events. This table currently supports a maximum
of ten (10) SNMP managers registered to receive
SNMP traps from the switch.
To access this table, select Trap Registration
from the Icon Subviews menu for the
StComCommonApp. This table will display the
following information:
IP Address
The IP address of the SNMP manager that is
interested in receiving trap events. All events are
sent to this IP address. If this field is set to zero,
the entire entry is deleted.
Admin Status
This field provides the actions available on this
table.
Source IP
This IP address is sent in the SNMP TRAP PDU as
the source of the trap. The SNMP manager can
optionally set this to any value, but if not set the
agent will choose its value.
UDP Port
This UDP port is used for transmission of all
SNMP TRAP PDUs to the SNMP manager. It can
either be set by the SNMP manager or the default
SNMP TRAP port will be used.
Sequence Num
This is the sequence number to be used when the
next SNMP TRAP PDU is encoded and transmitted
to this SNMP manager.
Entry Creation
Entry Creation