Specifications

Application Views StrataCom Application
Device Management Page 29 Cisco Stratacom BPX8600 and IGX8400
Failure and Bump Failure to determine reason for
failure.
No Route Found
The connection is failed because no route to the
remote endpoint could be found.
Bump Failure
The connection is failed because of insufficient
bandwidth to route to the remote endpoint. This
may have also been caused because a higher
priority connection took this connection’s
bandwidth. A higher priority connection is one
with the lowest Class Of Service (COS).
Endpt Pointer
The pointer to endpoint specific information.
Using this pointer the user can obtain
configuration and statistical information about
the connection.
Current Route Description
Describes the current route being used by this
connection. This descriptor gives information
about the domain, nodename, slot and possibly a
port and virtual trunk number for each hop in the
route.
Preferred Route Description
Describes the preferred route being used by this
connection. This descriptor gives information
about the domain, nodename, slot, and possibly a
port for each hop in the route.
Mst Pkt Load
This field provides the minimum packet load
available on the current path of this connection.
This field is determined by comparing available
bandwidth on every trunk on which the
connection is currently routed and reporting the
minimum available bandwidth. For interdomain
connections this value represents available
bandwidth through all domains. This variable is
meaningful for routed connections only. These
values are returned in packets per second.
Mst Cell Load
This field provides the minimum cell load
available on the current path of this connection.
This field is determined by comparing available
bandwidth on every trunk on which the
connection is currently routed and reporting the
minimum available bandwidth. For interdomain
connections this value represents available
bandwidth through all domains. This field is
meaningful for routed conections only.
Mst BData A Cmax
This field provides the minimum BDate A Cmax
available on the current path of this connection.
This field is determined by comparing available
BData A Cmax on every trunk on which the