Specifications

Application Views StrataCom Application
Device Management Page 28 Cisco Stratacom BPX8600 and IGX8400
To access this view, select Connection View from
the Icon Subviews menu for the
StComCommonApp. This view will display the
following information:
Next Endpoint Index
This field contains an appropriate value to be
used when creating entries in the connection
specific endpoint tables (e.g. Frame Relay
Endpoint Table). A value of minus one (-1)
indicates that no unassigned entries are
available. To obtain the Next Endpoint Index
value for a new entry, the manager issues a
management protocol retrieval operation to obtain
the current value of this field. After each retrieval,
the agent should modify the value to the next
unassigned index.
Index
The connection table index for this connection.
Local VC Endpt Desc
The description for the local VC endpoint.
Contains information about the domain,
nodename, slot, port, and address value for the
endpoint.
Type
The connection type.
Other Index
The remote node’s connection table index for this
connection endpoint.
Remote VC Endpt Desc
The description for remote VC endpoint. Contains
information about the domain, nodename, slot,
port, and address value for the endpoint.
Master Flag
Specifies whether this endpoint is the owner of
the connection.
Class Of Service
A class of service for this connection. The lower
the class value, the higher the routing priority of
the connection.
Group Flag
Specifies whether this is a grouped connection. In
the grouped connection case, the Connection
First Endpoint Pointer object is a pointer to a list
of endpoints in this group.
Admin Status
The requested state for connection. Values are:
Up, Down, Modify, WriteOnly, CreateGroup,
DeleteGroup.
Oper Status
The actual state of the connection. If the state is
failed, then look to the objects No Route Found