Specifications

Application Views StrataCom Application
Device Management Page 27 Cisco Stratacom BPX8600 and IGX8400
Bk Sonet Mode
The sonet mode (BXM only), where “smf” is single-
mode format, “mmf” is multi-mode format, and
“smflr” is single-mode format long reach. This
field is for BXM only.
ForeSight
If the card supports ForeSight, for line card only.
Values are: Yes or No.
Mux Bus Util
The percentage of the Muxbus utilization. This
field is defined for FRP, FRM, and UFM module on
IPX/IGX only. For other cards, the utilization is
“-1.”
Switch If
The Switch IF (Interface) Table provides you with
a list of ports and subports.
To access this view, select Switch IF from the
Icon Subviews menu for the
StComCommonApp. This view will display the
following information:
IF Number
The interface number is the index for the Switch
Interface Table, as well as the Switch Media
Tables and the Trunk Service Tables.
Slot
The slot number on the Switch Interface Table.
Port
The port number on the Switch Interface Table.
Subport
The subport number, used to identify virtual
trunks.
Media Type
The type of interface. This field is normally used
to provide information about a media layer, such
as ds1, ds3, or sonet.
Service
User requested service for logical interface table
row.
Adm Status
User requested state for logical interface table
row. Values are: Up, Down, Add, or Delete.
Oper Status
The current state for logical interface table row.
Connection View
This view describes all the connections associated
with this managed entity. The endpoints (virtual
circuits) related to these connections are defined
in connection type-specific tables.