Specifications

Advanced Application Integrations StrataCom ATM Integration
Device Management Page 124 Cisco Stratacom BPX8600 and IGX8400
• ATM Link Modeling Options View (Page 124)
• Stratacom ATM Link Model (Page 125)
See the ATM Circuit Manager User Guide
(3518) for complete information on SPECTRUM’s
ATM Circuit Manager.
ATM Link Modeling Options View
This view allows you to enable or disable the
modeling of StComATMLink models for the given
device model.
This button can be set to either true or false.
Setting this button’s value to true causes
StComATMLink models to be created. The default
setting is false.
Config Interval
This value represents the number of seconds
between link model configuration.
Clicking this button forces a link model
reconfiguration.
Clicking this button will display information on
the buttons and fields in this view and show you
how to force a link model reconfiguration.
Below are detailed instructions on how to create
and destroy StComATMLink models.
Creating StComATMLink Models
1 Model the device that contains the ATM
application.
2 Navigate to the Application view and find the
StComATMSwApp application icon.
3 Right-click the icon and select ATM Link
Modeling Options. You may select the
Option Explanations button to display
instructions on screen.
4 Set Create Link Models to true. Save the
change.
5 Click the Reconfigure Now button. This will
create StComATMLink models.
6 Launch your Device Topology view.
7 Locate a port model which has an ATM link
provisioned on it.
Create Link Models
Reconfigure Now
Option Explanations
false