Specifications

Device Management Page 120 Cisco Stratacom BPX8600 and IGX8400
Advanced Application Integrations
This section describes the Frame Relay and ATM integrations that are available for this management module.
StrataCom Frame Relay
Integration
The StrataCom Frame Relay integration is
available when a SPECTRUM installation includes
the Cisco StrataCom BPX8600 and IGX8400
series management module and SPECTRUM’s
Frame Relay Manager.
This integration uses two model types that allow
you to effectively model and manage Cisco
StrataCom Switches that operate in a Frame
Relay environment. StComFRApp is the
application model type that supports the frame
relay portions of the STRATACOM-MIB.
StComDLCIPort is a sub-interface model type that
allows you to manage DLCI ports on a Cisco
Stratacom Switch.
SPECTRUM will create the StComFRApp
application for any device that supports the
STRATACOM-MIB. If SPECTRUM’s Frame Relay
Manager is not installed, several basic views are
available for this application. For an explanation
of these views, see the Stratacom Frame Relay
Application on Page 70.
If you have Frame Relay Manger installed, an
additional view is available for the StComFRApp
and the StComDLCIPort model type is supported.
This additional functionality is explained in the
following sections:
• StrataCom Frame Relay Application Endpoint
Connection View (Page 121)
• Stratacom Frame Relay DLCI Port Model
(Page 121)
See the Frame Relay Manager User Guide
(2102) for complete information on SPECTRUM’s
Frame Relay Manager.