Specifications

Traps, Events, and Alarms Device-Specific Trap Support
Device Management Page 118 Cisco Stratacom BPX8600 and IGX8400
switchInvLogAlarm
A switchInvLogAlarm trap signifies that the
sending protocol entity has experienced too many
consecutive invalid login attempts and may be
under attack.
frLPortActive
A frLPortActive trap is generated when a Frame
Relay Port transitions to the active state.
frLPortInactive
A frLPortInactive trap is generated when a Frame
Relay Port transitions to the inactive state.
frLPortFailed
A frLPortFailed trap is generated when a Frame
Relay Port transitions to the failed state.
frLPortClear
A frLPortClear trap is generated when a Frame
Relay Port transitions from the failed state.
atmLPortActive
An atmLPortActive trap is generated when an
ATM Port transitions to the active state.
atmLPortInactive
An atmLPortInactive trap is generated when an
ATM Port transitions to the inactive state.
atmLPortFailed
An atmLPortFailed trap is generated when an
ATM Port transitions to the failed state.
atmLPortClear
An atmLPortClear trap is generated when an ATM
Port transitions from the failed state.
frEndptActive
A frEndptActive trap is generated when a new
Frame Relay endpoint becomes active.
frEndptInactive
A frEndptInactive trap is generated when a new
Frame Relay endpoint is deactivated (Downed).
frEndptDelete
A frEndptDelete trap is generated when a Frame
Relay endpoint is deleted.
frEndptFailed
A frEndptFailed trap is generated when a Frame
Relay endpoint transitions to the failed state.
frEndptClear
A frEndptClear trap is generated when a Frame
Relay endpoint transitions from the failed state.
atmEndptActive
An atmEndptActive trap is generated when a new
ATM endpoint becomes active.
atmEndptInactive
An atmEndptInactive trap is generated when a
new ATM endpoint is deactivated (Downed).