Specifications

Traps, Events, and Alarms Device-Specific Trap Support
Device Management Page 117 Cisco Stratacom BPX8600 and IGX8400
Proprietary Trap Descriptions
switchAlarmState
A switchAlarmState trap signifies that the
sending protocol entity is entering a new alarm
state.
switchRestart
A switchRestart trap signifies that the sending
protocol entity has experienced a cold start
(rebuild) of it's processor card.
switchProcSwitchOver
A switchProcSwitchOver trap signifies that the
sending protocol entity has experienced a
switchover of it's processor card.
switchEventOverflow
A switchEventOverflow trap signifies that the
sending protocol entity has experienced an
overflow of events. Events have been discarded
within the switch.
switchSlotInserted
A switchSlotInserted trap is generated when a
new card is inserted into the switch shelf.
switchSlotRemoved
A switchSlotRemoved trap is generated when a
card is removed from the switch shelf.
switchSlotActive
A switchSlotActive trap is generated when a new
card is configured as active within the switch
shelf.
switchSlotInactive
A switchSlotDeactivated trap is generated when a
card is configured as inactive within the switch
shelf.
switchSlotEnabled
A switchSlotEnabled trap is generated when a
card is configured from the downed state within
the switch shelf.
switchSlotDisabled
A switchSlotDisabled trap is generated when a
card is configured to the downed state within the
switch shelf.
switchSlotFailed
A switchSlotFailed trap is generated when a card
has transitioned into the failed state within the
switch shelf.
switchSlotClear
A switchSlotClear trap is generated when a card
has transitioned from the failed state within the
switch shelf.