Specifications

Device View Secondary Address Panel
Device Management Page 11 Cisco Stratacom BPX8600 and IGX8400
Secondary Address Panel
Access: From the Icon Subviews menu for the Interface
icon in the Device view, select Secondary Address Panel.
This panel provides a table of IP addresses and
masks obtained from the Address Translation
table within the device’s firmware. You can
change the current address displayed in the IP
Address field by selecting an entry from the table
in this panel and clicking the Update button.
StCom_IF_Port Interface Icons
Figure 5 shows a close-up of an StCom_IF_Port
interface icon from the Device view. Most of the
informational labels on the icon also provide
double-click access to other views, as explained in
the following label descriptions.
Figure 5: Interface Icon
c
b
5060000
ds3
a
a Interface Number Label
b IF Status Label
c Media Type Label
d Service Type Label
e Slot.Port.Subport
Identifier Label
atmRoutingTrunk
5.1.0
d
e
UP