Manualshelf

System information

ManualsBrandsCisco ManualsComputer equipment8540 - Catalyst Campus Switch Router Modular Expansion Base
61626364656667686970
Chapter 3. Ethernet switch interoperability 55
Now we set up the second port, Figure 33. We set the port ID to 2 and its
name to 42-02. The default VLAN ID is 42 and the 802.1Q type is Access.
Long Frame Handling is set to ENABLE, which means that frames according
to IEEE 802.3ac are supported. This support is required because of the VLAN
tag, which will be added to the frames.
Figure 34. Switch Port Control / Status: Port 3
The third port will be port ID 3. The Port Name is set to 83-01 and the default
VLAN ID is 83.