Manualshelf

System information

ManualsBrandsCisco ManualsComputer equipment8540 - Catalyst Campus Switch Router Modular Expansion Base
51525354555657585960
Chapter 3. Ethernet switch interoperability 41
Figure 20. VLAN Membership page
Click VLAN, and we enter the VLAN Membership page (Figure 20). All ports
are assigned to the same VLAN, “VLAN1”, as default. In this test we leave all
ports in that VLAN, but change the mode for port Fa0/7 and Fa0/8 from Static
Access to 802.1Q Trunk to enable trunking. Static Access ports belong to one
VLAN. Trunk Ports can belong to multiple VLANs. Even though the IBM
8275-322 does not support the 802.1Q standard, we need to set up the Cisco
2924XL as 802.1Q Trunk to enable the trunking and later bundle these two
ports into an EtherChannel group.