System information

36 IBM and Cisco LAN Switching: Interoperability and Migration Guide
Figure 15. 8275-322 System Reset
3.3.1.3 Cisco 2924-XL configuration
Now we go to the configuration of the Cisco 2924-XL Switch. As we intend to
use the Web interface and run the configuration from our browser, we need to
set up an IP address to access the switch. That can be done in several ways,
but the easiest way is to use the Setup Program. We need to connect a
terminal or emulator to the console port. The default is 9600 baud, 8 data bit,
1 stop bit and no parity. Connecting to the terminal we will see the System
Configuration Dialog.