System information

126 IBM and Cisco LAN Switching: Interoperability and Migration Guide
#module 2 : 12-port 10/100BaseTX Ethernet (not used)
!
OC12 Dual PHY MMF (not used)
!
#module 4 : 2-port MM OC-3 Dual-Phy ATM (not used)
!
#module 5 empty
!
#module 6 empty
!
module 7 : 24-port 10/100BaseTX Ethernet
set module name 7
set modul enable 7
set vlan 1 7/4-9,7/23-24
set vlan 11 7/3,7/13
set port enable 7/1-24
set port level 7/1-24 normal
set port speed 7/1-24 auto
set port trap 7/1-24 disable
set port name 7/1-24
set port security 7/1-24 disable
set port broadcast 7/1-24 0
set portmembership 7/1-24 static
set port protocol 7/1-24 ip on
set port protocol 7/1-24 ipx auto
set cdp enable 7/1-24
set cdp interval 7/1-24 60
set spantree portfast 7/23 enable
set spantree portfast 7/1-22,7/24 disable
set spantree portcost 7/2,7/9,7/11,7/13-14,7/24 19
set spantree portcost 7/1,7/3-8,7/10.7/12,7/15-23 100
set spantree portpri 7/1-24 32
!
#module 8 empty
!
#module 9 : 2-port MM OC-3 Dual-Phy ATM
set module name 9
set port level 9/1 normal
set port name 9/1-2
set cdp enable 9/1
set cdp interval 9/1 60
set trunk 9/1 on lane 1-1005
set spantree portcost 9/1 14
set spantree portpri 9/1 32
set spantree portvlanpri 9/1 0
set spantree portvlancost 9/1 cost 13
!