System information

Appendix A. IBM 8265 configuration for the MPOA test 123
Figure 102. Cisco 5500 Dual OC-3 Port Module Connection to port 16.3
The port 16.3 is connected to the Cisco 5500 Switch. The port UNI type is set
to Private. The signalling version set to Auto1. Operational Signalling Version
is discovered to be 3.12. Signalling is up and running.
8265_C2> show port 16.3 verbose
Type Mode Status
-------------------------------------------------------------------------------
16.03: UNI enabled UP
UNI Type : Private
Signalling Version : Auto 1
> Oper Sig. Version : 3.1 2
ILMI status : UP
ILMI vci : 0.16
RB Bandwidth : unlimited
Police admin. : on
Police oper. : on
Signalling vci : 0.5
RB Admin weight : 5040
NRB Admin weight : 5040
VPI range admin. : 0-15 (4 bits)
VCI range admin. : 0-1023 (10 bits)
VPI range oper. : 0-3 (2 bits)
VCI range oper. : 0-1024 (10 bits)
Connector : SC DUPLEX
Media : multimode fiber
Port speed : 155000 kbps
Connection shaping : Off.
Remote device is active
Frame format : SONET STS-3c
Scrambling mode : frame and cell
Clock mode : internal.