System information

112 IBM and Cisco LAN Switching: Interoperability and Migration Guide
Figure 89. Status of 8270 MPC client
Figure 89 shows:
1 The client is enabled.
2 It will perform fragmentation.
MPC >MPC-BASE
MPOA Client Base Console
========================
MPC Base>STATE
MPOA Client State:
==================
ATM Interface Number: 0
State: MPC UP STATE
Time Since Last State Change (h:m:s): 01:54:20
Last (internal) error code: 0
Network-layer protocols enabled: IP
MPC Base>LIST-CONFIG
MPOA Client Configuration:
=========================
Status: ENABLED 1
Shortcut Setup Frame Count: 1
Shortcut Setup Frame Time: 2 (sec)
Initial Retry Time: 5 (sec)
Maximum Retry Time: 40 (sec)
Hold Down Time: 160 (sec)
VCC Timeout Period: 20 (min)
Accept Config From LECS: Yes
Fragmentation Mode: Perform Fragmentation 2
Interface: 0
ESI: 40.00.82.70.00.04
Selector: 0
Desired PCR: 155000 (kbps)
Maximum Reserved Bandwidth: 0 (kbps)
Line Rate: 155 (Mbps)
Enable LANE Shortcuts: TRUE 3
Source MAC Address for Shortcuts: Burned In
Packet Trace Filtering Parameters:
=================================
ATM Address Pkt Trace Filter Value
0000000000000000000000000000000000000000
ATM Address Pkt Trace Filter Mask
0000000000000000000000000000000000000000
LAN Pkt Trace Filter Value
000000000000
LAN Pkt Trace Filter Mask
000000000000