System information

Chapter 4. ATM LAN backbone interoperability and migration 105
Figure 80. Creating domain “Cisco”
Next we define VLAN 11 to port 3 and port 13 on module 7.
Figure 81. Define VLAN 11, adding ports 3 and 13.
4.3.3.2 Building the LAN emulation client
The command lane client Ethernet 11 S1Ethernet creates an ELAN
named S1Ethernet on the LANE module in slot 9 of the Catalyst 5500 UUT
(Unit Under Test) and ties it to the previously defined VLAN 11.
Cisco Systems Console
Enter password:
cat5500-sup enable
Enter password:
cat5500-sup (enable) set vtp domain cisco
VTP domain cisco modified
cat5500-sup (enable) show vtp domain
Domain Name Domain Index VTP Version Local Mode Password
---------------------------- ------------ ----------- ----------- ----------
cisco 1 2 server -
Vlan-count Max-vlan-storage Config Revision Notifications
---------- ---------------- --------------- -------------
19 1023 13 disabled
Last Updater V2 Mode Pruning PruneEligible on Vlans
--------------- -------- -------- -------------------------
10.10.10.248 disabled disabled 2-1000
cat5500-sup (enable) set vlan 11 7/3,7/13
VLAN Mod/Ports
---- -----------------------
11 7/3,7/13
cat5500-sup (enable) show vlan 11
VLAN Name Status IfIndex Mod/Ports, Vlans
---- -------------------------------- --------- ------- ------------------------
11 VLAN0011 active 1599 7/3,7/13
VLAN Type SAID MTU Parent RingNo BrdgNo Stp BrdgMode Trans1 Trans2
---- ----- ---------- ----- ------ ------ ------ ---- -------- ------ ------
11 enet 100011 1500 - - - - - 0 0