System information

94 IBM and Cisco LAN Switching: Interoperability and Migration Guide
In the Domain Indices window we first add token-ring interfaces to connect
the MSS client to the domains already set up in the base switch. We create
three interfaces knowing that the test would need only two domains to be
configured. The hardware type is selected from the pull-down menu and the
domain index is set equal to the domain index in the base configuration. The
default domain is index 0.
Figure 68. Enabling MSS client ATM Interface
In the Device Interfaces window, shown in Figure 68, we now set up the ATM
interface of the MSS client. The network ID is 0. The interface 1, NHRP-ATM
0 is set by default but not used in this test.