Troubleshooting guide

Troubleshoot Your Configuration
If your ADSL service is not working properly, see Troubleshooting PPPoA.
Previous Page Main Page
All contents are Copyright © 1992−−2003 Cisco Systems Inc. All rights reserved. Important Notices and Privacy Statement.
Cisco DSL Router Configuration and Troubleshooting
Guide
PPPoA Implementation Options
Select one of the following Point−to−Point Protocol over ATM (PPPoA) implementation options for your
Asymmetric Digital Subscriber Line (ADSL) service. Both implementation options include configuration
examples for Network Address Translation (NAT) overload, NAT Pool, Static NAT, and Dynamic Host
Control Protocol (DHCP) Server.
Select the option that describes the type of PPPoA service your ISP is providing.
PPPoA Option 1 Your ISP is assigning a single dynamic public IP address to your Cisco DSL Router.
PPPoA Option 2 Your ISP is assigning a single static public IP address to your Cisco DSL Router.
Previous Page Main Page
All contents are Copyright © 1992−−2003 Cisco Systems Inc. All rights reserved. Important Notices and Privacy Statement.
Cisco DSL Router Configuration and Troubleshooting
Guide
PPPoE Implementation Options
for the Cisco DSL Router Acting as a PPPoE Client
Select one of the following Point−to−Point Protocol over Ethernet (PPPoE) implementation options for your
Asymetric Digital Subscriber Line (ADSL) service. Both implementation options include configuration
examples for Network Address Translation (NAT) overload, NAT Pool, Static NAT, and Dynamic Host
Control Protocol (DHCP) Server.
Select the implementation that describes the type of PPPoE service your ISP is providing.
Cisco DSL Router Configuration and Troubleshooting Guide