Troubleshooting guide
!−−− ip nat inside source list 1 interface bvi1 overload
!−−− with the following two configuration statements:
!−−− ip nat inside source list 1 pool <nat pool name> overload
!−−− ip nat pool <nat pool name> <first ip address> <last ip address>
!−−− netmask <subnet mask>
!−−− If Internet users require access to an internal server, you can
!−−− add the following static NAT configuration statement:
!−−− ip nat inside source static tcp <inside ip address of server> {80 or 25}
!−−− <outside well−known ip address of server> {80 or 25} extendable
!−−− Note: TCP port 80 (HTTP/web) and TCP port 25 (SMTP/mail) are used
!−−− for this example. You can open other TCP or UDP ports, if needed.
!
ip classless
ip route 0.0.0.0 0.0.0.0 <default gateway to isp>
access−list 1 permit <ip network address of ethernet0> <wildcard mask>
!−−− In this configuration, access−list 1 defines a standard access list
!−−− permitting the addresses that NAT will translate. For example, if
!−−− your private IP network was 10.10.10.0, configuring
!−−− access−list 1 permit 10.10.10.0 0.0.0.255 would allow NAT to translate
!−−− packets with source addresses between 10.10.10.0 and 10.10.10.255.
!
bridge 1 protocol ieee
bridge 1 route ip
!
end
Troubleshoot Your Configuration
If your ADSL service is not working properly, see Troubleshooting RFC1483 Bridging with IRB.
Previous Page Main Page
All contents are Copyright © 1992−−2003 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.
Cisco DSL Router Configuration and Troubleshooting
Guide
IRB with a Dynamic IP Address
Your Internet Service Provider (ISP) has assigned a dynamic public IP address to your Cisco Digital
Subscriber Line (DSL) router.
Tip: If you are not familiar with configuring Cisco devices and would like to follow a step−by−step
configuration, click here.
Tasks to Perform
Note: A color code is used to relate tasks in this section with examples of configurations in the Configuration
section. Configurations are color−coded as follows: Dynamic Host Configuration Protocol (DHCP) Server,
Cisco DSL Router Configuration and Troubleshooting Guide