Installation guide

5
Connect an ADSL Line
78-6853-03
Connect an ADSL Line
Connect an ADSL Line
Follow these steps to connect an ADSL line to the ADSL port on your router.
Note The following instructions are for a straight-through ADSL cable, but they also apply if you are using
a crossover cable to connect your ADSL line. One ADSL cable is supplied with the Cisco 827 router,
and it is selected during the ordering process. If you have microfilters or do not have the phone
service on the same line, use the lavender CAB-ADSL-RJ11 cable. If you have a splitter installed,
use the lavender with blue stripe CAB-ADSL-RJ11X cable.
Figure 4 Connecting a Cisco 827 Router to an ADSL Line
Step 1 Connect the lavender ADSL cable to the lavender ADSL port on the router.
Step 2 Connect the other end of the ADSL cable to the external wall jack.
Cisco 827-4V router
ETHERNET
CONSOLE
ADSL
4
3
2
1
PHONE
TO HUB
TO PC
1
+5,+12,-12,-24,-71, VDC
Model Cisco 827-4V
Wall jack