Installation guide

4
Connect the Cisco 827 Router to a Hub
78-6853-03
Connect the Cisco 827 Router to a Hub
Connect the Cisco 827 Router to a Hub
Follow these steps to connect the Cisco 827 router to a hub:
Figure 3 Connecting a Cisco 827 Router to a Hub
Step 1 Connect the yellow Ethernet cable from the yellow Ethernet port on the back panel of the router to the
Ethernet port on the hub.
Step 2 Verify that the TO HUB/TO PC switch on the left side of the back panel has been set to the TO HUB
position (in). If the button is out, press it to set it to the in position.
Cisco 827-4V router
Cisco 1528 Micro Hub 10/100
1
SPEED
100BaseTX
10BaseT
LED
SOLID
BLINK
2
3
4
5
6
7
8
MDI MDI-X
5X 6X 7X 8X
1X 2X 3X 4X
10/100
ETHERNET
CONSOLE
ADSL
4
3
2
1
PHONE
TO HUB
TO PC
1
+5,+12,-12,-24,-71, VDC
Model Cisco 827-4V