Installation guide

3
Connect the Cisco 827 Router to a PC
78-6853-03
Connect the Cisco 827 Router to a PC
Connect the Cisco 827 Router to a PC
Follow these steps to connect the Cisco 827 router to a PC:
Figure 2 Connecting a Cisco 827 Router to a PC
Step 1 Connect the yellow Ethernet cable from the yellow Ethernet port on the back panel of the router to the
Ethernet port on the NIC on the computer.
Step 2 Verify that the TO HUB/TO PC switch on the left side of the back panel has been set to the TO PC
position (out). If the button is in, press it to set it to the out position.
PC
SER 0
OK
LAN
AUXAUX
Cisco 827-4V router
ETHERNET
CONSOLE
ADSL
4
3
2
1
PHONE
TO HUB
TO PC
1
+5,+12,-12,-24,-71, VDC
Model Cisco 827-4V