Datasheet

© 2012 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 12 of 15
Feature
Specification
Environmental operating
range
C819G
C819 HG
C819HGW and C819HWD
32 to 104°F
(0 to 40°C)
–13 to 140°F
(–25 to 60°C)
–13 to 140°F
(–25 to 60°C)
Operating altitude
Above 5000 ft derate maximum operating temperature 1.50C per 1000 feet
Maximum altitude: 10,000 ft
Standard safety
certifications
●
UL 60950-1, 2nd edition
●
CAN/CSA C22.2 No. 60950-1, 2nd edition
●
EN 60950-1, 2nd edition
●
CB to IEC 60950-1, 2nd edition with all group differences and national deviations
EMC emissions
EN55022/CISPR22, CFR 47 Part 15, ICES003, VCCI-V-3, AS/NZS CISPR22, CNS13438, EN300-386,
EN61000-3-2, EN61000-3-3, and EN61000-6-1
EMC immunity
EN55024/CISPR24, (EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-11),
and EN300-386
Radio Immunity
EN301 489-1, EN 301 489-7, and EN301 489-24
Cellular radio
EN 301 908-1, EN 301 908-2, EN 301 511, 47 CFR Part 22, and 47 CFR Part 24
Humidity
C819G
Maximum 85% non-condensing RH
C819 HG
Maximum 95% non-condensing RH
C819HGW and C819HWD
Maximum 95% non-condensing RH
Operating conditions (Cisco
819HG C819HGW and
C819HWD)
●
IP 41 per IEC 60529 for Vertical Falling Water
●
Pollution 3 for Dust
Operational Vibration
●
MIL-STD-810G 2.2.1 Category 4; truck transportation over U.S. highways-restrained cargo
●
EN61373 functional random vibe - category 1, class B
●
SAE J1455 operating random vibe cap mounted truck
●
SAE J1455 Operating Sinusoidal Vibration, Category 3
Nonoperational Vibration
●
MIL-STD-810G 2.3.9 Category 20 - Ground vehicles
●
EN61373 simulated non-op long-life vibe - category 1, class B
●
SAE J1455 Non-operating Sinusoidal Vibration, Category 3
Operational Shock
●
MIL-STD-810G 2.2.2 Procedure 1, Functional Shock
Nonoperational Shock
●
MIL-STD-810G 2.2.2 Procedure 5, Crash Hazard
●
MIL-STD-810G 2.2.2 Procedure 6, Bench Handling
●
EN61373 non-op shock class B
●
SAE J1455 4.11.3.1 Handling test
Vibration and Shock
(Railway Vehicles)
●
EN61373 Functional Random Vibe - Category 1, Class B
●
EN61373 Simulated Non-op Long-life Vibe - Category 1, Class B
●
EN61373 Non-op Shock, Class B
Power specifications
The default configuration includes an external AC adapter that supplies up to 20 W of power. The AC power
connection is a two-pin IEC 320 C8 receptacle. A mating AC power cord is supplied. The AC adapter does not
provide chassis grounding to the router. A 1.3 meter long output cable connects to the router.
AC Power Adapter
●
Input Voltage: 85-264 VAC 100-240 VAC nominal
●
Maximum Power Consumption: 25W
●
Maximum Output Power Rating: 20 W ( 5VDC, 4 Amps)
Optional external DC power adapters are available for 12 VDC and 24 VDC nominal vehicle power.
●
12 VDC vehicle adapter has a 10 VDC to 36 VDC operating range
●
24 VDC vehicle adapter has an 18 VDC to 75 VDC operating range*
The vehicle power adapters may be used for fixed or mobile installations. They do not provide electrical isolation;
the input negative is connected to the output negative (chassis ground). Input cable is 1 meter long with stripped
and tinned bare wire connections. The input positive connection is a white wire and the input negative is a black
wire.