Specifications

Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
QUESTION 142
Each of these vlans has one host each on its ports
SVI on vlan 1 - ip 192.168.1.11
Switch B
Ports 3, 4 connected to ports 3 and 4 on Switch A Port 15 connected to Port on Router.
Tasks to do:
1. Use non proprietary mode of aggregation with Switch B being the initiator
Use LACP with B being in Active mode
2. Use non proprietary trunking and no negotiation
Use switchport mode trunk and switchport trunk encapsulation dot1q
3. Restrict only to the VLANs needed
Use either VTP pruning or allowed VLAN list. The preferred method is using allowed VLAN list
4. SVI on VLAN 1 with some ip and subnet given
5. Configure switch A so that nodes other side of Router C are accessible
On switch A the default gateway has to be configured.
6. Make switch B the root
Correct answer:
SW-A: verify with show run if you need to create vlans 21-23 and verify trunk's native vlan
(remove if not 99)
SW-A# int vlan 1