Specifications

Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
CORE, DSW1, DSW2, ASW1 and ASW2. The topology diagram indicates their desired pre-VLAN
spanning tree mapping. Previous configuration attempts have resulted in the following issues:
 CORE should be the root bridge for VLAN 20; however, DSW1 is currently the root bridge for
VLAN 20.
 Traffic for VLAN 30 should be forwarding over the gig 1/0/6 trunk port between DSW1 and
DSW2. However VLAN 30 is currently using gig 1/0/5.
 Traffic for VLAN 40 should be forwarding over the gig 1/0/5 trunk port between DSW1 and
DSW2. However VLAN 40 is currently using gig 1/0/6.
You have been tasked with isolating the cause the these issuer and implementing the appropriate
solutions. You task is complicated by the fact that you only have full access to DSW1, with isolating
the cause of these issues and implementing the appropriate solutions, Your task is complicated by
the fact that you only have full access to DSW1, with the enable secret password cisco. Only limited
show command access is provided on CORE, and DSW2 using the enable 2 level with a password
of acme. No configuration changes will be possible on these routers. No access is provided to ASW1
or ASW2.