Specifications

Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
QUESTION 137
The headquarter offices for a book retailer are enhancing their wiring closets with Layer3 switches.
The new distribution-layer switch has been installed and a new access-layer switch cabled to it.
Your task is to configure VTP to share VLAN information from the distribution-layer switch to the
access-layer devices. Then, it is necessary to configure interVLAN routing on the distribution layer
switch to route traffic between the different VLANs that are configured on the access-layer
switches; however, it is not necessary for you to make the specific VLAN port assignments on the
access-layer switches. Also, because VLAN database mode is being deprecated by Cisco, all VLAN
and VTP configurations are to be completed in the global configuration mode. Please reference the
following table for the VTP and VLAN information to be configured:
Requirements:
These are your specific tasks:
1. Configure the VTP information with the distribution layer switch as the VTP server
2. Configure the VTP information with the access layer switch as a VTP client
3. Configure VLANs on the distribution layer switch
4. Configure inter-VLAN routing on the distribution layer switch
5. Specific VLAN port assignments will be made as users are added to the access layer switches
in the future.
6. All VLANs and VTP configurations are to completed in the global configuration. To configure
the switch click on the host icon that is connected to the switch be way of a serial console cable.