Specifications

Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
A. No more than one secure MAC address should be set.
B. The default is set.
C. The IP phone should use a dedicated port, therefore only one MAC address is needed per
port.
D. No value is needed if the switchport priority extend command is configured.
E. No more than two secure MAC addresses should be set.
Correct Answer: E
QUESTION 40
Refer to the exhibit. From the configuration shown, what can be determined?
A. The sticky addresses are only those manually configured MAC addresses enabled with the
sticky keyword.
B. The remaining secure MAC addresses are learned dynamically, converted to sticky secure
MAC addresses, and added to the running configuration.
C. A voice VLAN is configured in this example, so port security should be set for a maximum of
2.
D. A security violation restricts the number of addresses to a maximum of 10 addresses per
access VLAN and voice VLAN. The port is shut down if more than 10 devices per VLAN
attempt to access the port.
Correct Answer: B
QUESTION 41
Refer to the above. Three switches are configured for HSRP. Switch1 remains in the HSRP listen
state. What is the most likely cause of this status?