Specifications

Ensurepass.com Easy Test! Easy Pass!
Download the complete collection of Exam's Real Q&As www.ensurepass.com
HOST 2:
You need to configure SwitchC so that Hosts H1 and H2 can successful ping the server S1. Also
SwitchC needs to be able to ping server S1.
Due to administrative restrictions and requirements you should not add/delete vlans, changes
VLAN port assignments or create trunk links Company policies forbid the use of static or default
routing All routes must be learned via EIGRP 65010 routing protocol.
You do not have access to RouteC, RouterC is correctly configured. No trunking has been configured
on RouterC.
Routed interfaces should use the lowest host on a subnet when possible. The following subnets
are available to implement this solution:
 172.16.1.0/24
 192.168.3.32/27
 192.168.3.64/27
Hosts H1 and H2 are configured with the correct IP address and default gateway. SwitchC uses Cisco
as the enable password.
Routing must only be enabled for the specific subnets shown in the diagram.