Installation guide
Table Of Contents
- Cisco 806 Router and SOHO 71 Router Cabling and Setup
- Cisco One-Year Limited Hardware Warranty Terms
- Streamline Installation: Try These Steps First!
- Overview
- Parts List
- Verify the PC Setup
- Connect the Cisco 806 Router or SOHO 71 Router to a PC
- Connect the Router to the Internet
- Connecting a Terminal or PC to the Console Port (Optional)
- Connect the Power and Turn On the Router
- Connect to a Website
- Congratulations! You’re Done!
- If You Cannot Connect to a Website
- Obtaining Documentation
- Documentation Feedback
- Cisco Product Security Overview
- Obtaining Technical Assistance
- Obtaining Additional Publications and Information
1-12
Cisco 806 and SOHO 71 Router Cabling and Setup
78-10354-06
Chapter 1 Cisco 806 Router and SOHO 71 Router Cabling and Setup
Parts List
Parts List
The shipment of your router includes the following items:
• One Cisco 806 router or SOHO 71 router
• Two yellow Ethernet cables
• One blue console cable
• One black power supply
• One black power supply cord
• Cisco 800 and SOHO Series Product Documentation
If any of the items is missing or damaged, contact your customer service representative.
Verify the PC Setup
Before you begin, verify that each computer that will be connected to the router has an Ethernet network
interface card (NIC) installed and that Transmission Control Protocol/Internet Protocol (TCP/IP) has
been loaded and configured. For more information on how to configure TCP/IP, refer to the
documentation that came with your computer or to the Cisco Router Web Setup User Guide, which is
available onCisco.com. Turn the PCs off after verifying PC setup.