Specifications

4-23
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.5
OL-23092-01
Chapter 4 Configuring Settings on the Cisco Unified IP Phone
Device Configuration Menu
Locale Configuration Menu
The Locale Configuration menu displays information about the user locale and the network locale used
by the phone. Table 4-12 describes the options on this menu.
NTP Configuration Menu for SIP Phones
The NTP Configuration menu displays information about the NTP server and mode configuration used
by SIP phones. Table 4-13 describes the options on this menu.
Table 4-12 Locale Configuration Menu Options
Option Description To Change
User Locale User locale associated with the phone user. The
user locale identifies a set of detailed
information to support users, including
language, font, date and time formatting, and
alphanumeric keyboard text information.
For more information on installing user locale,
refer to the Cisco Unified Communications
Operating System Administration Guide.
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
User Locale Version Version of the user locale loaded on the phone. Display only—Cannot configure.
User Locale Char Set Character set that the phone uses for the user
locale.
Display only—Cannot configure.
Network Locale Network locale associated with the phone user.
The network locale identifies a set of detailed
information that supports the phone in a specific
location, including definitions of the tones and
cadences used by the phone.
From Cisco Unified Communications Manager
Administration, choose Device > Phone >
Phone Configuration.
Network Locale Version Version of the network locale loaded on the
phone.
Display only—Cannot configure.
NTP Configuration (SIP
phones only)
Provides access to the NTP Configuration Menu.
For more information, see NTP Configuration
Menu for SIP Phones, page 4-23.
Display only—Cannot configure.
Table 4-13 NTP Configuration Menu Options
Option Description To Change
NTP IP Address 1 IP address of the primary NTP server. From Cisco Unified Communications Manager
Administration, choose System > Phone NTP
Reference.
NTP IP Address 2 IP address of the secondary or backup NTP
server.
From Cisco Unified Communications Manager
Administration, choose System > Phone NTP
Reference.