Specifications

1-9
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
OL-21011-01
Chapter 1 An Overview of the Cisco Unified IP Phone
What Features are Supported on the Cisco Unified IP Phone 7962G and 7942G?
Cisco Unified IP Phones do not support URLs with IPv6 addresses in the URL. This affects all IP Phone
Service URLs, including services, directories, messages, help, and any restricted web services that
require the phone to use the HTTP protocol to validate the credentials with the Authentication URL. If
you configure Cisco Unified IP Phone services for Cisco IP Phones, you must configure the phone and
the servers that support the phone service with IPv4 addresses.
If you configure IPv6 Only as the IP Addressing Mode for phones that are running SIP, the Cisco TFTP
service overrides the IP Addressing Mode configuration and uses IPv4 Only in the configuration file.
For more information on deploying IPv6 in your Cisco Unified Communications network, refer to
Internet Protocol Version 6 (IPv6) in Cisco Unified Communications Manager Features and Services
Guide and Deploying IPv6 in Unified Communications Networks with Cisco Unified Communications
Manager 8.0.
Related Topics
• Understanding Interactions with Other Cisco Unified IP Telephony Products, page 2-1
• Understanding the Phone Startup Process, page 2-7
• Network Configuration Menu, page 4-5
What Features are Supported on the Cisco Unified
IP
Phone 7962G and 7942G?
Cisco Unified IP Phone functions much like a digital business phone, allowing you to place and receive
phone calls. In addition to traditional telephony features, the Cisco Unified IP Phone includes features
that enable you to administer and monitor the phone as a network device.
This section includes the following topics:
• Feature Overview, page 1-9
• Configuring Telephony Features, page 1-10
• Configuring Network Parameters Using the Cisco Unified IP Phone, page 1-10
• Providing Users with Feature Information, page 1-11
Feature Overview
Cisco Unified IP Phones provide traditional telephony functionality, such as call forwarding and
transferring, redialing, speed dialing, conference calling, and voice messaging system access.
Cisco
Unified IP phones also provide a variety of other features. For an overview of the telephony
features that the Cisco
Unified IP Phone supports and for tips on configuring them, see Telephony
Features Available for the Cisco Unified IP Phone, page 5-1.
As with other network devices, you must configure Cisco Unified IP Phones to prepare them to access
Cisco
Unified Communications Manager and the rest of the IP network. By using DHCP, you have fewer
settings to configure on a phone, but if your network requires it, you can manually configure an IP
address, TFTP server, subnet information, and so on. For instructions on configuring the network
settings on the Cisco
Unified IP Phones, see Configuring Settings on the Cisco Unified IP Phone.
Cisco Unified IP Phones can interact with other services and devices on your IP network to provide
enhanced functionality. For example, you can integrate the Cisco
Unified IP Phones with the corporate
Lightweight Directory Access Protocol 3 (LDAP3) standard directory to enable users to search for