Specifications
B-1
Cisco Unified IP Phone Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP and SIP)
OL-21011-01
APPENDIX
B
Feature Support by Protocol for Cisco Unified
IP Phone 7962G and 7942G
This appendix provides information about feature support for the Cisco Unified IP Phone 7962G and
7942G using the SCCP or SIP protocol with Cisco
Unified Communications Manager Release 8.0.
Table B-1 provides a high-level overview of calling features and their support by protocol. This table
focuses primarily on end-user calling features and is not intended to represent a comprehensive listing
of all available phone features. For details about user interface differences and feature use, refer to Cisco
Unified IP Phone Guide.
This guide is available at this URL:
http://www.cisco.com/en/US/products/hw/phones/ps379/tsd_products_support_series_home.html
The specific sections that describe the features in the phone guide are referenced in Table B-1.
Ta b l e B-1 Cisco Unified IP Phone 7962G and 7942G Feature Support by Protocol
Features
Cisco Unified IP Phones 7962G, 7942G,
7961G, 7961G-GE, 7941G, and 7941G-GE
For More InformationSCCP SIP
Calling Features
Abbreviated Dialing Supported Supported Basic Call Handling—Placing a Call: Additional
Options
Audible Message Waiting
Indicator
Supported Supported Accessing Voice Messages
Auto Answer Supported Supported Using a Handset, Headset, and
Speakerphone—Using Auto Answer
Auto Dial Supported Supported Basic Call Handling—Placing a Call: Basic Options
Barge (and cBarge) Supported Supported Advanced Call Handling—Using a Shared Line
Busy Lamp Field (BLF) Supported Supported Advanced Call Handling—Using BLF to Determine
a Line State
Busy Lamp Field (BLF)
Pickup
Supported Supported Advanced Call Handling—Using BLF to Determine
a Line State
Busy Lamp Field (BLF)
Speed Dial
Supported Supported Advanced Call Handling—Using BLF to Determine
a Line State